Products
-
Automated Epoxy Dispensing +UV Curing Production Line for Auto Car Radio Case Product AL-DPC02
Dispensing robot applying UV curing adhesive to the Auto Car Radio Case according the dispensing program（also could upload the product 3D drawing to computer to set the dispensing program directly）, after adhesive dispensed, then move the case into the curing oven, using curing lights to curing the adhesive by high temperature.
-
Heat Sink Assembly Machine
Solution for HeatSink- Thermal Paste Alumina Ceramic Isolator- Thermal paste - Transistor – Screw-Locking assembly
Application industry: Heat sink in drivers, adapters, PC power supplies, bridges, MOS transistors, UPS power supply, etc.
-
Floor Type Laser Robot Machine GR-F-LS441
Laser soldering includes pasting laser soldering, wire laser soldering and ball laser soldering. Solder paste, tin wire and solder ball are often used as filler materials in the laser soldering process.
Application and Samples
- Laser soldering includes solder paste for laser soldering, wire laser soldering and ball laser soldering
- Solder paste, tin wire and solder ball are often used as filler materials in the laser soldering process
-
Desktop Type Laser Soldering Machine for Wire Coil Soldering LAW400V
Application and Samples
- Laser soldering includes solder paste for laser soldering, wire laser soldering and ball laser soldering
- Solder paste, tin wire and solder ball are often used as filler materials in the laser soldering process
-
Double Tin Ball Laser Soldering Machine LAB201
After being heated and melted by a laser, the solder balls are ejected from the special nozzle and directly cover the pads. No additional flux or other tools are needed. It is very suitable for processing that requires temperature or soft board connection welding area. During the entire process, the solder joints and the welding body are not in contact, which solves the electrostatic threat caused by contact during the welding process.
-
in 1 Solder paste Dispenser and Laser Spot Soldering Machine GR-FJ03
Paste Laser Soldering
Solder paste laser welding process is suitable for conventional PCB / FPC pin, pad line and other types of products.
The processing method of solder paste laser welding can be considered if the precision requirement is high and the manual way is challenging to achieve.
-
Laser Soldering Robot Machine with Solder Paste Soldering LAW300V
Laser soldering machine for PCB industry.
What is laser soldering?Utilize a laser to fill and melt the tin material to achieve connection, conduction and reinforcement.
Laser is a non-contact processing method. Compared with the traditional way, it has incomparable advantages, good focusing effect, heat concentration, and a minimal thermal impact area around the solder joint, which is conducive to prevent deformation and damage of the structure around the workpiece.
-
PC Type Automatic Laser Soldering Machine
is a cost-effective, fully automatic IC programming device / fully automatic IC writer / fully automatic IC writer designed to meet the needs of large-scale production of electronic products. The system uses IPC (built-in control card) + servo system + optical alignment system mode, fast and accurate positioning, fully automatic to complete chip capture, place, write, take film and packaging conversion process, to replace the traditional person Work, both greatly improve the production efficiency, but also eliminates the possible human error in the IC programming process. Equipment transmission system uses high-speed high-reliability design, built-in programmer using STI’s latest speed intelligent universal programmer SUPERPRO 5000, every module completely independent rapid burn film, the efficiency is much higher than the parallel mass production programmer. Support PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP package chip. Modular system design, project switching time is short, high reliability.
-
Plastic Laser Welding Machine LAESJ220
- High laser power density, welding can be completed without flux solder
- Firm welding spot, small heat affected area
- Professional welding control system, high stability, LCD touch screen control, easy to learn
- CCD visual adjustment, convenient, precise
-
Floor-Type Blue Light Laser Soldering Machine With High Precision CCD System LAW501
- Controlling the temperature of the solder joint,
- No contamination by the soldering tool
- Soldering of components of different materials
- Short soldering times , better temperature and shock resistance
- Contactless machining …..no tool wear
- Use of high-melting solder pastes
-
Laser Solder Paste Soldering Machine for FPC and PCB Products LAP300
CCD automatic puzzle scanning after the position chase, start to point solder paste, the
use of galvanometer or single focus optical system of disposable whole plate laser welding;- Movement system 6-axis horizontal joint manipulator+platform structure; Automatic mounting prefabricated soldering disc system: refer to SMT mechanism principle(optional).
- Equipped with six-axis solder supply system
- Equipped with temperature measurement system, output real-time temperature curve
- For the non temperature resistant patches in FPC and PCB welding, thermal element welding is adopted
- Outstanding advantages, high efficiency, excellent performance .
-
AOI Automatic Inspection Equipment In-Line AOI detector GR-2500X
AOI device advantages:
Fast speed, at least 1.5 times faster than existing equipment in the market;
The detection rate is high, with an average of 99.9%;
Less misjudgment;
Reduce labor cost, significantly increase production capacity and profits;
Improve quality, reduce unstable personnel replacement efficiency and waste of training time, and greatly enhance quality;
Operation analysis, automatically generating defect analysis tables, facilitating tracking and problem finding.
