Green Piezo Injection Valve—GR-P101
Device Parameter
| Operating frequency | 0~800cycle/s |
| Feed pressure | 0～45Psi |
| Minimum point diameter | 0.28mm |
| The thinnest line width | 0.24mm |
| Viscosity range | 1～250000cps |
| Dispensing accuracy | 10mg±2%，100mg±1% |
| Dimension | 170*80*32mm |
| Weight | 650g |
| Feed connection | Ruhr joint |
| Can be connected to cylinder specifications | 30CC |
| Cooling pipe specification | Outer diameter 4mm air pipe |
| Piezoelectric package module | Stainless steel |
| Runner module | Standard stainless steel (Optional: PEEK material) |
| Firing pin | Tungsten steel/ceramic/diamond |
| Nozzle | Tungsten steel/ceramic/diamond |
| Fluid seal ring | polyethylene/polytetrafluoroethylene/nitrile rubber/fluororubber/perflurane |
| Other O-rings | fluorine rubber |
| Heating block | Aluminum alloy |
| Nozzle heating rod specification | 24V (DC) 20W |
| Rubber drum heating rod specification | 24V (DC) 50W2 pieces |
| Nozzle heating temperature range | 0~160℃ |
| Syringe heating range | 0~160℃ |
Product advantage
1. Quick calibration configuration of valve body top.
2. Various configurations correspond to various fluid characteristics.
3. High-precision non-contact spray dispensing.
4.ADJ Nozzle position difference correction.
5. Effectively reduce user consumables and use costs.
Valve body capacity
Glue: Hot melt glue, Loctite 3542
Linewidth :0.24mm
Glue: Red glue, viscosity 250,000 cps
Point diameter :0.4mm
Write your message here and send it to us
